Woodguard SWO Swedish Wood Oil - Free Shipping

Woodguard SWO - Swedish Wood Oil

WOODguard® SWO is a clear, water repellent that helps retard warping, cupping, splitting and nail popping. Especially designed for pressure-treated lumber. Restores lubricity lost in wood during pressure treatment. Recommended for pressure treated wood decks, docks, pilings, fences, storage buildings and all other pressure treated wood application. FREE SHIPPING ON 5 GALLON PAILS TO CONTINENTAL USA.
SKU:
From $0.00
By Woodguard
Size
Minus Plus
Typically ships in 1 business day
More details Right

Free Ground Shipping on 5 Gallon Pails
We are offering free shipping for 5 gallon pails of this product for addresses in the Lower 48 United States. Offer does not apply to Alaska, Hawaii, and the US Territories. Free Shipping applies to this item only and not the entire order.

Specially designed for pressure-treated lumber, WOODguard® SWO is a clear and colorless protectant designed to help prevent warping, cupping, splitting and nail popping in wood. Acting as a sub-surface lubricant, WOODguard SWO is actually absorbed into wood and bonds with its cell structure. While effectively repelling water, the product’s oils work to lubricate and stabilize the wood.

Features and Benefits
• Superior penetrating, water-repellent treatment.
• Recommended for use on pressure-treated wood decks, docks, pilings, fences, storage buildings and all other pressure-treated wood.
• Clear and colorless to highlight the wood’s natural grain.
• Dries into the wood and will never crack or peel.
• Helps retard warping, cupping, splitting and nail popping.
• Restores wood lubricity typically lost during wood pressure treatment.
• Meets VOC standards in all 50 states. Learn more about VOC emissions.

Recommended Usage
• SWO is recommended for use on pressure treated wood decks, fences, storage buildings and all other pressure-treated wood construction projects.

Color Information
• WOODguard SWO dries into the wood and does not provide any color. Application of SWO will give wood an oiled appearance which weathers out to a silvery grey color over time.
• Most alkyd/oil-based stains can be applied over WOODguard SWO after two weeks cure period. It is best to apply this dual treatment first to a small remote surface in order to verify compatibility. Do not attempt to apply latex finishes/stains over SWO.
• Do not tint!

Coverage Rate and Application Methods
• Approximately 250-300 sq. ft/gal. depending on surface condition and wood porosity.
• WOODguard SWO can be brushed, rolled or sprayed.
• One moderate coat is sufficient. Do not over apply.

Preparation Instructions
• Surfaces should be cleaned and free of all loose debris.
• Use only as much as can be readily absorbed by the wood.
• Test before using.
• Do not use on painted surfaces.
• When using wood that has not been kiln dried, wait six months after construction before treating for maximum penetration.
• Moisture content of wood should be less than 18%.

New Decks and Docks
• Allow the deck or dock to dry for two to three months.
• Sweep to remove dirt and debris before application.

Weathered, Untreated Decks and Docks
• Make sure surface is free of all dirt and debris.
• If a new appearance is desired, clean with a pressure washer to remove the gray surface of wood.
• After washing, let the wood surface dry for three days before applying WOODguard SWO.

When Pressure Washing
• To avoid wood damage, and achieve maximum effectiveness, make sure the pressure is set below 500 psi, and keep the nozzle of the power washer approximately one foot from the surface.
• Apply to dry wood for maximum penetration and fastest drying. Do not over apply.

Application Instructions
1. WOODguard SWO penetrates into the wood with only a small portion evaporating. Do not apply to painted or otherwise sealed or highly dense surfaces. If in doubt, apply to a small test area. If the wood absorbs the treatment readily, it is suitable for use.
2. WOODguard SWO does not "DRY" in the conventional sense. It cures into the wood. Blot up any excess SWO left unabsorbed on the surface.
3. Apply above 50 degrees F for fastest cure time. Hot weather promotes a faster cure time. Below 65 degrees F, SWO may become too viscous to spray.
4. WOODguard SWO softens asphalt (including asphalt shingles) - avoid contact.
5. Do not apply if rain is expected within 36 hours.
6. Avoid open flame during application and until the oil has thoroughly penetrated the treated surface.
7. Any subsequent coating applied over SWO must be tested on a remote area to verify compatiblity before application. SWO's highly water repellant system will repel latex coatings and may not be compatible with some oil or alkyd coatings.
8. Until SWO has thoroughly cured, treated area my be slippery.
9. WOODguard SWO may be applied to newly-constructed, pressure-treated decks that are thoroughly dry. Use only enough SWO to be readily absorbed.

Clean Up and Storage
• Use detergent and water on fresh SWO coated brushes and tools.
• If it has had time to cure, mineral spirits or paint thinner may be used for clean up.
• Store in a secure, dry, well-ventilated area protected from extreme temperatures.
• Do not transfer to unmarked containers.
• Keep container tightly closed when not in use.
• Do not store with strong oxidizing agents such as peroxide.

Woodguard Swedish Wood Oil Application & Technical Resources:
• Product Guide
• Product Label
• Material Safety Data Sheet (MSDS)

Product Questions

  • For new pressure treated docks, how long should the pressure treated lumber dry out before being sealed with SWO?

    Hello,
    Woodguard's Technical Support tells us to give it three months, but that you can possibly stain it sooner if you have dry weather.

  • My deck is 6 years old and was originally stained with exterior wood stain. Can I apply SWO on it this year?

    The Swedish Wood Oil is formulated to penetrate deep into the wood fibers, so it needs to go over bare wood to perform correctly. I would definitely not put it over any finish that forms a film coating as it will not penetrate like it should.

    If your prior finish has worn down to bare wood, then Swedish Wood Oil could be a very good choice for you. If that's not the case, I would recommend calling our office to speak with one of our support agents. They should be able to look into your situation in more detail and will be happy to give you a recommendation on how to proceed.

  • Can you add a mildewcide to the product?

    Yes, you can use a mildewcide additive with the Woodguard Swedish Wood Oil. Just thoroughly mix the two very well before application and occasionally mix periodically to make sure the mildewcide stays suspended in the oil.

  • Can I stain the wood first and then apply Woodguard SWO?

    Swedish Wood Oil cannot be used with another stain since this is considered a stand-alone product. The Swedish Wood Oil will turn the wood to a silvery gray over time, while giving the wood protection from the elements. It is not recommended that you use any other product along with this finish.

  • Can I add maple tint to this to give it some color?

    Woodguard SWO's manufacturer advises against tinting it.

DETAILS

Free Ground Shipping on 5 Gallon Pails
We are offering free shipping for 5 gallon pails of this product for addresses in the Lower 48 United States. Offer does not apply to Alaska, Hawaii, and the US Territories. Free Shipping applies to this item only and not the entire order.

Specially designed for pressure-treated lumber, WOODguard® SWO is a clear and colorless protectant designed to help prevent warping, cupping, splitting and nail popping in wood. Acting as a sub-surface lubricant, WOODguard SWO is actually absorbed into wood and bonds with its cell structure. While effectively repelling water, the product’s oils work to lubricate and stabilize the wood.

Features and Benefits
• Superior penetrating, water-repellent treatment.
• Recommended for use on pressure-treated wood decks, docks, pilings, fences, storage buildings and all other pressure-treated wood.
• Clear and colorless to highlight the wood’s natural grain.
• Dries into the wood and will never crack or peel.
• Helps retard warping, cupping, splitting and nail popping.
• Restores wood lubricity typically lost during wood pressure treatment.
• Meets VOC standards in all 50 states. Learn more about VOC emissions.

Recommended Usage
• SWO is recommended for use on pressure treated wood decks, fences, storage buildings and all other pressure-treated wood construction projects.

Color Information
• WOODguard SWO dries into the wood and does not provide any color. Application of SWO will give wood an oiled appearance which weathers out to a silvery grey color over time.
• Most alkyd/oil-based stains can be applied over WOODguard SWO after two weeks cure period. It is best to apply this dual treatment first to a small remote surface in order to verify compatibility. Do not attempt to apply latex finishes/stains over SWO.
• Do not tint!

Coverage Rate and Application Methods
• Approximately 250-300 sq. ft/gal. depending on surface condition and wood porosity.
• WOODguard SWO can be brushed, rolled or sprayed.
• One moderate coat is sufficient. Do not over apply.

SPECIFICATIONS
MORE INFORMATION

Preparation Instructions
• Surfaces should be cleaned and free of all loose debris.
• Use only as much as can be readily absorbed by the wood.
• Test before using.
• Do not use on painted surfaces.
• When using wood that has not been kiln dried, wait six months after construction before treating for maximum penetration.
• Moisture content of wood should be less than 18%.

New Decks and Docks
• Allow the deck or dock to dry for two to three months.
• Sweep to remove dirt and debris before application.

Weathered, Untreated Decks and Docks
• Make sure surface is free of all dirt and debris.
• If a new appearance is desired, clean with a pressure washer to remove the gray surface of wood.
• After washing, let the wood surface dry for three days before applying WOODguard SWO.

When Pressure Washing
• To avoid wood damage, and achieve maximum effectiveness, make sure the pressure is set below 500 psi, and keep the nozzle of the power washer approximately one foot from the surface.
• Apply to dry wood for maximum penetration and fastest drying. Do not over apply.

Application Instructions
1. WOODguard SWO penetrates into the wood with only a small portion evaporating. Do not apply to painted or otherwise sealed or highly dense surfaces. If in doubt, apply to a small test area. If the wood absorbs the treatment readily, it is suitable for use.
2. WOODguard SWO does not "DRY" in the conventional sense. It cures into the wood. Blot up any excess SWO left unabsorbed on the surface.
3. Apply above 50 degrees F for fastest cure time. Hot weather promotes a faster cure time. Below 65 degrees F, SWO may become too viscous to spray.
4. WOODguard SWO softens asphalt (including asphalt shingles) - avoid contact.
5. Do not apply if rain is expected within 36 hours.
6. Avoid open flame during application and until the oil has thoroughly penetrated the treated surface.
7. Any subsequent coating applied over SWO must be tested on a remote area to verify compatiblity before application. SWO's highly water repellant system will repel latex coatings and may not be compatible with some oil or alkyd coatings.
8. Until SWO has thoroughly cured, treated area my be slippery.
9. WOODguard SWO may be applied to newly-constructed, pressure-treated decks that are thoroughly dry. Use only enough SWO to be readily absorbed.

Clean Up and Storage
• Use detergent and water on fresh SWO coated brushes and tools.
• If it has had time to cure, mineral spirits or paint thinner may be used for clean up.
• Store in a secure, dry, well-ventilated area protected from extreme temperatures.
• Do not transfer to unmarked containers.
• Keep container tightly closed when not in use.
• Do not store with strong oxidizing agents such as peroxide.

Woodguard Swedish Wood Oil Application & Technical Resources:
• Product Guide
• Product Label
• Material Safety Data Sheet (MSDS)
REVIEWS
PRODUCT QUESTIONS

Product Questions

  • For new pressure treated docks, how long should the pressure treated lumber dry out before being sealed with SWO?

    Hello,
    Woodguard's Technical Support tells us to give it three months, but that you can possibly stain it sooner if you have dry weather.

  • My deck is 6 years old and was originally stained with exterior wood stain. Can I apply SWO on it this year?

    The Swedish Wood Oil is formulated to penetrate deep into the wood fibers, so it needs to go over bare wood to perform correctly. I would definitely not put it over any finish that forms a film coating as it will not penetrate like it should.

    If your prior finish has worn down to bare wood, then Swedish Wood Oil could be a very good choice for you. If that's not the case, I would recommend calling our office to speak with one of our support agents. They should be able to look into your situation in more detail and will be happy to give you a recommendation on how to proceed.

  • Can you add a mildewcide to the product?

    Yes, you can use a mildewcide additive with the Woodguard Swedish Wood Oil. Just thoroughly mix the two very well before application and occasionally mix periodically to make sure the mildewcide stays suspended in the oil.

  • Can I stain the wood first and then apply Woodguard SWO?

    Swedish Wood Oil cannot be used with another stain since this is considered a stand-alone product. The Swedish Wood Oil will turn the wood to a silvery gray over time, while giving the wood protection from the elements. It is not recommended that you use any other product along with this finish.

  • Can I add maple tint to this to give it some color?

    Woodguard SWO's manufacturer advises against tinting it.