Cascade Clear Top Coat
FREE SHIPPING ON 5 GALLON PAILS TO CONTINENTAL USA.
Features | |
---|---|
Opacity Refers to how easily one can see through the stain. Translucent means that the wood grain is easily visible through the stain. Semi-transparent means that the wood grain is obscured by the pigment in the stain but is still visible.
|
|
Stain Base |
|
Stain Type Refers to how this stain was designed to work. Coatings form a flexible solid barrier on the outside of the surface to protect from the outside-in. Deep penetrating oils normally do not form a surface barrier and protect from the inside-out.
|
|
Product Type |
|
Companion Product Stain the manufacturer intends to be used with this stain as a system. Please see application details for usage instructions.
|
|
Sheen |
|
Usage Area Type of surface where this product is suitable for use.
|
|
Coverage Rate Coverage rate can vary greatly depending on the texture of the surface. Please see description for full details.
|
|
Coats for First Application How many coats of this stain that are normally needed for the first application over bare wood.
|
|
Coats for Maintenance How many coats of this stain that are normally needed when the stain has weathered and is in need of a maintenance coat.
|
|
Clean-Up |
|
Item | |
Brand |
Sashco
|
Size |
(2) 1 Gallon Pack
|
Sheen |
Matte
|
Features | |
---|---|
Opacity Refers to how easily one can see through the stain. Translucent means that the wood grain is easily visible through the stain. Semi-transparent means that the wood grain is obscured by the pigment in the stain but is still visible.
|
|
Stain Base |
|
Stain Type Refers to how this stain was designed to work. Coatings form a flexible solid barrier on the outside of the surface to protect from the outside-in. Deep penetrating oils normally do not form a surface barrier and protect from the inside-out.
|
|
Product Type |
|
Companion Product Stain the manufacturer intends to be used with this stain as a system. Please see application details for usage instructions.
|
|
Sheen |
|
Usage Area Type of surface where this product is suitable for use.
|
|
Coverage Rate Coverage rate can vary greatly depending on the texture of the surface. Please see description for full details.
|
|
Coats for First Application How many coats of this stain that are normally needed for the first application over bare wood.
|
|
Coats for Maintenance How many coats of this stain that are normally needed when the stain has weathered and is in need of a maintenance coat.
|
|
Clean-Up |
|
Item | |
Brand |
Sashco
|
Size |
(2) 1 Gallon Pack
|
Sheen |
Matte
|
Free Ground Shipping on 5 Gallon Pails
We offer free shipping for 5 gallon pails of this product shipping to the Lower 48 United States. Offer does not apply to Alaska, Hawaii, and the US Territories. Free Shipping applies to this item only and not the entire order.
Cascade Clear Top Coat is the clear finishing top coat of Sashco’s Capture/Cascade staining system. Cascade’s sheen brings out the depth and character of the wood grain while minimizing color shifts in the Capture Log Stain.
Its easy-to-apply water-based formula makes routine maintenance simple and headache-free. Cascade provides added exterior protection against damaging UV rays, molds and fungi.
Sashco Cascade Features & Benefits
• Maintenance made easy: Simply clean the surface, apply Cascade to bring back that just-stained look.
• Easy water clean-up: Skin, earth, and nose friendly is always a plus. No harsh chemicals required.
• Easy to know when: If the surface has lost its sheen, it’s time for maintenance.
• Won’t discolor chinking: Cascade is clear, so routine maintenance applications won’t affect the color of your chinking or other sealants.
• Repels water: Keeps your logs in tip-top shape and your rot concerns at bay.
• Resists mildew & algae: Ensures that unsightly growths stay where they belong – in a lab, not on your logs.
• Protects against UV damage: Cascade protects Capture Log Stain from major color shifts to maintain that just- stained look.
Where to use Sashco Cascade
• Specifically formulated for use over Capture Log Stain on the exterior of log, timber frame, and wood homes.
Where Not to Use Sashco Cascade
• Surfaces previously coated with a non-drying waxy oil-based stain
• Walking surfaces, including decks, floors, and stairs
• Furniture
• Cabinetry
Sashco Cascade Coverage Rate
• 400-600 sq. ft. per gallon
• As with all stains, coverage will vary depending upon roughness and porosity of the wood.
Cascade Clear Top Coat Technical Guides
Cascade Clear Top Coat Product Guide
Cascade Clear Top Coat SDS
Sashco Technical Support
If you have questions or issues regarding the Sashco line of products, Sashco Technical Support is available at 800-767-5656.
Sashco Cascade Application Instructions Sashco Cascade Application Steps Sashco Cascade Clean Up & Storage |
Product Questions
-
I have some leftover Cascade in my garage, but it might have gotten frozen over the winter. Is it still good to use?
Sashco Cascade has a freeze-thaw pass for at least 5 cycles. Storage location should not be subject to freezing. I would open the pail and if you smell a rotten egg odor, discard the product.
-
How often do I have to apply Cascade to keep the finish up?
Sashco Cascade is used as the protective topcoat over Sashco Capture stain. I would check the south and west sides of your home which gets the most weather and sun damage to see if you still have water repellency active. Take a hose and wet the wood and if it does not appear to repel water, then this would probably be a great time to clean the wood and apply a new coat of Cascade.
-
Can I use Cascade directly onto the wood without using Capture?
Sashco Cascade is a topcoat used over Sashco Capture stain. It is not intended to be a stand alone finish over bare wood.
-
Is it okay to apply more than 1 coat of Cascade for a higher sheen?
Sashco Cascade is used as a topcoat over Sashco Capture stain. It is recommended that you use only one, good coat of Cascade over the stain. Cascade comes in a Satin and Semi-Gloss sheen so if you want a little shinier look, you will want to use the Semi-Gloss Cascade.
DETAILS
Free Ground Shipping on 5 Gallon Pails
We offer free shipping for 5 gallon pails of this product shipping to the Lower 48 United States. Offer does not apply to Alaska, Hawaii, and the US Territories. Free Shipping applies to this item only and not the entire order.
Cascade Clear Top Coat is the clear finishing top coat of Sashco’s Capture/Cascade staining system. Cascade’s sheen brings out the depth and character of the wood grain while minimizing color shifts in the Capture Log Stain.
Its easy-to-apply water-based formula makes routine maintenance simple and headache-free. Cascade provides added exterior protection against damaging UV rays, molds and fungi.
Sashco Cascade Features & Benefits
• Maintenance made easy: Simply clean the surface, apply Cascade to bring back that just-stained look.
• Easy water clean-up: Skin, earth, and nose friendly is always a plus. No harsh chemicals required.
• Easy to know when: If the surface has lost its sheen, it’s time for maintenance.
• Won’t discolor chinking: Cascade is clear, so routine maintenance applications won’t affect the color of your chinking or other sealants.
• Repels water: Keeps your logs in tip-top shape and your rot concerns at bay.
• Resists mildew & algae: Ensures that unsightly growths stay where they belong – in a lab, not on your logs.
• Protects against UV damage: Cascade protects Capture Log Stain from major color shifts to maintain that just- stained look.
Where to use Sashco Cascade
• Specifically formulated for use over Capture Log Stain on the exterior of log, timber frame, and wood homes.
Where Not to Use Sashco Cascade
• Surfaces previously coated with a non-drying waxy oil-based stain
• Walking surfaces, including decks, floors, and stairs
• Furniture
• Cabinetry
Sashco Cascade Coverage Rate
• 400-600 sq. ft. per gallon
• As with all stains, coverage will vary depending upon roughness and porosity of the wood.
Cascade Clear Top Coat Technical Guides
Cascade Clear Top Coat Product Guide
Cascade Clear Top Coat SDS
Sashco Technical Support
If you have questions or issues regarding the Sashco line of products, Sashco Technical Support is available at 800-767-5656.
SPECIFICATIONS
MORE INFORMATION
Sashco Cascade Application Instructions Sashco Cascade Application Steps Sashco Cascade Clean Up & Storage |
REVIEWS
PRODUCT QUESTIONS
Product Questions
-
I have some leftover Cascade in my garage, but it might have gotten frozen over the winter. Is it still good to use?
Sashco Cascade has a freeze-thaw pass for at least 5 cycles. Storage location should not be subject to freezing. I would open the pail and if you smell a rotten egg odor, discard the product.
-
How often do I have to apply Cascade to keep the finish up?
Sashco Cascade is used as the protective topcoat over Sashco Capture stain. I would check the south and west sides of your home which gets the most weather and sun damage to see if you still have water repellency active. Take a hose and wet the wood and if it does not appear to repel water, then this would probably be a great time to clean the wood and apply a new coat of Cascade.
-
Can I use Cascade directly onto the wood without using Capture?
Sashco Cascade is a topcoat used over Sashco Capture stain. It is not intended to be a stand alone finish over bare wood.
-
Is it okay to apply more than 1 coat of Cascade for a higher sheen?
Sashco Cascade is used as a topcoat over Sashco Capture stain. It is recommended that you use only one, good coat of Cascade over the stain. Cascade comes in a Satin and Semi-Gloss sheen so if you want a little shinier look, you will want to use the Semi-Gloss Cascade.