Perma-Chink Lifeline Accents Exterior Stain

Perma Chink Lifeline Accents Preparation Instructions
• Check for deterioration and decay.
• Remove and replace or repair deteriorated wood.
• Unsound wood should be repaired prior to applying Lifeline Accents.
• All surfaces should be free from mill glaze and contaminates including dirt, dust, mold and mildew, old finishes, water repellents and wax.
• Use appropriate Perma-Chink Systems products to remove existing finishes and/or to clean and prepare surfaces.
• If a borate preservative has been previously applied, make sure it is completely dry before applying Lifeline Accents.
• If the surface is tacky or there are visible deposits on the wood, wash the surface with water and allow it to dry.
• DO NOT USE LIFELINE ACCENTS ON SURFACES THAT HAVE BEEN BRUSHED OR RUBBED WITH STEEL WOOL. IF YOU DO, RUST SPOTS MAY APPEAR UNDER THE FINISH.
• If more than a week has passed since the surface has been stripped or cleaned, wash down the logs with Log Wash™, rinse well and allow the surface to dry before applying Lifeline Accents.
• If the surface has been media blasted or if the wood is rough and/or porous, apply a coat of Prelude™ Clear Wood Primer prior to the Lifeline Accents application. This will ensure proper color generation and add an extra measure of protection to the wood.

Perma Chink Lifeline Accents Application Instructions
• Stir thoroughly before and regularly during use.
• Wear rubber gloves to avoid stains to the skin and fingernails.
• If multiple containers are used on the job, they should be mixed together to ensure color consistency. Lifeline Accents can be applied with a brush or airless sprayer.
• DO NOT APPLY TO HOT SURFACES OR IN DIRECT SUNLIGHT.
• Do not apply when the surface temperature is below 40° F or above 90° F.
• Back brushing is required to work the finish into the wood for optimum performance. Always keep a “wet edge” to avoid lap marks.
• Lifeline Accents should always be applied in thin coats.
• Wait for the first coat to dry (at least two hours depending on temperature and humidity) then apply a second coat.
• Always back brush to ensure even coverage and to avoid visible drips and runs.
• Once the Lifeline Accents has dried and you are satisfied with the appearance, apply one or two coats of Lifeline Advance Gloss or Satin clear topcoat.
• Lifeline Advance exterior clear topcoats enhance the beauty of the finish and play a significant role in protecting the wood against water, mold, and UV light, thus extending the life of the stain. Follow all application directions when applying Advance topcoat.

Perma Chink Lifeline Accents Clean Up
• Clean area and equipment immediately with warm, soapy water.
• For sprayers and other commercial equipment, follow the manufacturer’s directions.
• For removing Lifeline Accents that has dried, soften with alcohol or mineral spirits and then clean with warm water.

Perma Chink Lifeline Accents Maintenance
• Periodic cleaning with an appropriate cleaner such as Log Wash™ helps extend the life of the finish and accentuates the beauty of your home.
• It is recommended that log walls be washed down at least twice a year.
• Wood checking, cracking and shrinkage may eventually expose unprotected wood.
• Apply periodic maintenance coats as needed paying special attention to the south and west sides of the home as they may have greater exposure to the elements.

Perma Chink Lifeline Accents Storage
• Store Lifeline Accents out of direct sunlight and protect from freezing.
• Although Lifeline Accents is freeze-thaw stable, if the product is accidentally frozen, allow it to thaw, mix well and check for suitability of use before applying.

Permachink How-To Guides For Lifeline Accents Exterior Stain:
• How to Apply Lifeline Exterior Stains
• Lifeline Exterior Stains Vs. Oil-Based Stains
• Maintenance Coats of Lifeline Accents
• Applying Lifeline Accents Over Existing Stains
• Applying Lifeline Accents Over Oil-Based Stains
• Mixing Lifeline Advance Satin Exterior Topcoat
• The Role of Lifeline Advance Exterior Topcoat